Porcelain enamel steel water tank
Keyword:
customized porcelain enamel steel water tank pricelist
Porcelain enamel steel water tank
Category:
Product Description
Product Introduction
Our company's combined porcelain steel plate water tanks use advanced technology and high-quality materials to ensure clean water quality; they are also corrosion-resistant, easy to clean, have a longer lifespan than ordinary water tanks, are convenient and flexible for on-site assembly, are not easily deformed, have strong earthquake resistance, and high impact resistance. The product has performed well over extended periods of use. Our company is now mass-producing them and developing towards generalization, standardization, and serialization, ensuring reliable product quality. Porcelain steel plate water tanks have a wide range of applications, suitable not only for new construction projects but also providing convenient conditions for the updating and replacement of water tanks in older buildings. The water tanks can store both cold and hot water, are acid and alkali resistant, leak-proof, non-deformable, and non-corrosive.
Application Range
Combined porcelain steel plate water tanks are mainly used for regulating building water supply, fire water tanks, storage water tanks, expansion of heating systems, condensate water tanks, temporary water tanks for building construction, road construction, geological exploration, and national defense projects. When used as a hot water tank, the rubber gasket should be changed to a GB5574-85, 4710 type heat-resistant rubber gasket.
Installation and Acceptance
1. During installation, leave an inspection passage of no less than 700 mm between the tank body and the wall. The top and bottom of the tank should have no less than 600 mm clearance.
2. During civil construction, prepare the supports first. The edge seams between the water tank perimeter and the standard blocks at the bottom of the water tank should be located on the supports.
3. After assembly, close the water outlet pipe and drain pipe, open the inlet pipe, and check while releasing water until the tank is full. No leakage within 24 hours indicates that it is qualified.
Selection Instructions
1. When ordering, please provide the tank size, pipe connection position, and pipe diameter.
2. Water tank accessories can be supplied together.
3. The water storage temperature should preferably be 4~65℃. If the water storage temperature is higher than this value, please specify it when ordering, and we will find a solution separately.
4. No other welds should be welded inside or outside the water tank to prevent damage to the porcelain surface.
5. The load of the water tank on the ground should be determined by the structural designer.
6. The water tank should be cleaned regularly, and debris should be prevented from entering the tank during water testing.
7. If the water tank connection position provided by the user is exactly at the plate seam, our company needs to adjust it, the pipe diameter remains unchanged (without further notice to the user).
- 产品描述
-
- Commodity name: Porcelain enamel steel water tank
Our company's combined porcelain enamel steel plate water tanks utilize advanced technology and high-quality materials to ensure clean water. They are corrosion-resistant, easy to clean, and have a longer lifespan than ordinary water tanks. On-site assembly is convenient, flexible, and resistant to deformation, earthquakes, and impacts. The product has proven effective through long-term use. Our company now mass-produces these tanks, moving towards standardization and serialization, ensuring reliable product quality. Porcelain enamel steel plate water tanks are widely used, suitable not only for new construction projects but also for convenient upgrades of water tanks in older buildings. The tanks can store both hot and cold water and are acid-resistant, alkali-resistant, leak-proof, deformation-resistant, and corrosion-resistant.
Product Introduction
Our company's combined porcelain steel plate water tanks use advanced technology and high-quality materials to ensure clean water quality; they are also corrosion-resistant, easy to clean, have a longer lifespan than ordinary water tanks, are convenient and flexible for on-site assembly, are not easily deformed, have strong earthquake resistance, and high impact resistance. The product has performed well over extended periods of use. Our company is now mass-producing them and developing towards generalization, standardization, and serialization, ensuring reliable product quality. Porcelain steel plate water tanks have a wide range of applications, suitable not only for new construction projects but also providing convenient conditions for the updating and replacement of water tanks in older buildings. The water tanks can store both cold and hot water, are acid and alkali resistant, leak-proof, non-deformable, and non-corrosive.
Application Range
Combined porcelain steel plate water tanks are mainly used for regulating building water supply, fire water tanks, storage water tanks, expansion of heating systems, condensate water tanks, temporary water tanks for building construction, road construction, geological exploration, and national defense projects. When used as a hot water tank, the rubber gasket should be changed to a GB5574-85, 4710 type heat-resistant rubber gasket.
Installation and Acceptance
1. During installation, leave an inspection passage of no less than 700 mm between the tank body and the wall. The top and bottom of the tank should have no less than 600 mm clearance.
2. During civil construction, prepare the supports first. The edge seams between the water tank perimeter and the standard blocks at the bottom of the water tank should be located on the supports.
3. After assembly, close the water outlet pipe and drain pipe, open the inlet pipe, and check while releasing water until the tank is full. No leakage within 24 hours indicates that it is qualified.Selection Instructions
1. When ordering, please provide the tank size, pipe connection position, and pipe diameter.
2. Water tank accessories can be supplied together.
3. The water storage temperature should preferably be 4~65℃. If the water storage temperature is higher than this value, please specify it when ordering, and we will find a solution separately.
4. No other welds should be welded inside or outside the water tank to prevent damage to the porcelain surface.
5. The load of the water tank on the ground should be determined by the structural designer.
6. The water tank should be cleaned regularly, and debris should be prevented from entering the tank during water testing.
7. If the water tank connection position provided by the user is exactly at the plate seam, our company needs to adjust it, the pipe diameter remains unchanged (without further notice to the user).
Water tank production equipment
Honors and Qualifications
Packaging and shipping
FAQ
If you are interested in this product, please fill in the following information and submit it to us, and we will arrange for experts to contact you as soon as possible!
Related Products
Related Products